Vis Hydraulics液壓安全閥，RVB0.M16
VIS閥門直接作用 - 提升型
描述
一個螺絲，墨盒式，直接作用，提升型，通常
閉式液壓安全閥。
它通常用于保護液壓元件免受壓力
瞬變。
當入口（1）的壓力達到閥門設定值時，
閥開始打開到罐（2），提供有限的壓力上升。
尺寸減小和響應時間
閥門非常適合于先導電路。
滯后也非常低。
技術(shù)特點
所有外表面均鍍鋅，防腐蝕。
所有閥門零件均由高強度鋼制成。 提升器硬化
并保持zui小的磨損和延長使用壽命。
如果調(diào)節(jié)螺絲從閥門中退出，則無外部
預計泄漏（密封彈簧座）
可選彈簧范圍為450巴（6700 psi）
油箱端口（端口2）上的背壓直接與之相加
閥門設置為1：1比例。
公制腔。
Vis Hydraulics液壓安全閥，RVB0.M16

RVB0.M16 Valve Series

METRIC Cartridge - 450 bar
Direct acting - Poppet Type

Description
A screw-in, cartridge style, direct acting, poppet type, normally
closed hydraulic relief valve.
It’s typically used to protect hydraulic components from pressure
transients.
When the pressure at the Inlet (1) reaches the valve setting, the
valve starts to open to tank (2) providing a limited pressure rise.
The reduced dimensions and the excellent response time make this
valve ideally suited for pilot circuits.
Hysteresis is also extremely low.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to guarantee minimal wear and to extend service life.
In case adjustment screw is backed out of the valve, no external
leakage is expected (sealed spring seat)
Optional spring ranges to 450 bar (6700 psi)
Back pressure on the tank port (port 2) is directly additive to the
valve setting at a 1:1 ratio.
Metric cavity.

Vis Hydraulics液壓安全閥，RVB0.M16